Papers

2025

Beyond the dynamic Hall-Petch effect: Mechanical twinning for microscopic strain delocalization

J. Kang, C.C. Taşan
Scripta Materialia, 255 (2025) 116346

2024

Remove hydrogen and store it too: An acid-in-clay based electro-chemical solution

K.S. Kim, J.S. Park, Y.C. Yoon, J. Kim, B. Yildiz, J. Li, C.C. Tasan
Materials Horizons, (2024)

On spatial variations in hydrogen-induced dislocation activity: An in-situ investigation

H. Yan, J. Kim, C.C. Taşan
International Journal of Hydrogen Energy, (2024)

Plastic Deformation and Strengthening Mechanisms in CoNiCrFe High Entropy Alloys: The Role of Lattice Site Occupancy

P. Pandey, S. Kumar, N. Khatavkar, H.S. Oh, A. Godha, S.K. Makineni, A. Singh, C.C. Taşan, K. Chattopadhyay
International Journal of Plasticity, (2024)

Discovering pyramidal treasures: Multi-scale design of high strength-ductility titanium alloys

S.L. Wei, K-S. Kim, J. Foltz, C.C. Taşan
Advanced Materials, 36 (2024) 2406382

Crystallographic contributions to grain boundary cracking in an age-hardened copper alloy

F. Worsnop, C.C. Taşan
Scripta Materialia, 247 (2024) 116108

Solid-state steelmaking by scrap consolidation: A processing pathway with minimal energy and CO2 burdens

O. Güvenç, R. Lizarde, C.C. Taşan
Journal of Cleaner Production, 452 (2024) 141976

Cavity growth – or lack thereof – in imperfectly roll bonded sheet metal

C.J.A. Mornout, O. Güvenç, C.C. Taşan
Journal of Materials Processing Technology, (2024) 118385

Role of the nanoscale austenite in micro-strain heterogeneity in PH17-4 martensitic stainless steels

H.S. Oh, J. Kang, M. Jiang, C.C. Tasan
Materials Science and Engineering: A, 895 (2024) 146122

Calphad-assisted design of high strength–ductility martensitic stainless-steels with reverted austenite

M. Jiang, H.S. Oh, K.S. Kim, C.C. Taşan
Acta Materialia, 266 (2024) 119641

Composition-dependent transformation-induced plasticity in Co-based complex concentrated alloys

H.S. Oh, M. Xu, S.L. Wei, F.F. Worsnop, J.M. LeBeau, C.C. Tasan
Acta Materialia, 262 (2024) 119349

2023

An in situ investigation of neighborhood effects in a ferrite-containing quenching and partitioning steel: mechanical stability, strain partitioning, and damage

J. Kang, N.S. Pottore, H. Zhu, C.C. Tasan
Acta Materialia, 254 (2023) 118985

Determination of short-range order in TiVNbHf(Al)

M. Xu, S.L.Wei, C.C. Taşan J.M. LeBeau
Applied Physics Letters, 122 (2023) 181901

On the plastic deformation of a CoCrFeNiW-C alloy at elevated temperatures Part II. Grain boundary sliding and damage mechanisms

S.L.Wei, C.C. Taşan
Acta Materialia, 252 (2023) 118898

Detecting thermally-induced spinodal decomposition with picosecond ultrasonics in cast austenitic stainless steels

S. Al Dajani, B. R. Dacus, C. A. Dennett, M. G.Burke, L. Waldron, T. S. Byun, J. J. Wall, K. Anglin, O. A. Al Dajani; K. J. Krakowiak, F.-J. Ulm, A. Schwartzmann, C.C. Taşan, P. Hosemann, M. P. Short
Acta Materialia, 246 (2023) 118552

Partial differential equations to determine elasto-plastic stress-strain behavior from measured kinematic fields

B.C. Cameron, C.C. Taşan
International Journal of Plasticity, 162 (2023) 103512

Carbon segregation and cementite precipitation at grain boundaries in quenched and tempered lath martensite

L. Morsdorf, A. Kashiwar, C. Kübel, C.C. Taşan
Materials Science and Engineering A, 862 (2023) 144369

On the plastic deformation of a CoCrFeNiW-C alloy at elevated temperatures: Part I. Serrated plastic flow and its latent dynamics

S.L. Wei, D.P. Moriarty, M. Xu, J.M. LeBeau, C.C. Taşan
Acta Materialia, 242 (2023) 118430

An in situ study of microstructural strain localization and damage evolution in an (α + β) Ti-Al-V-Fe-Si-O alloy

J Kang, HS Oh, SL Wei, G Zhu, I Nakahata, C.C. Taşan
Acta Materialia, 242 (2023) 118424

Strain partitioning in a multi-phase V-Ti-Ni alloy containing superelastic nano-precipitates

J.L. Cho, C. C. Taşan
Metallurgical and Materials Transactions A, 54 (2023) 381–390

2022

An in situ synchrotron X-ray study of reverse austenitic transformation in a metastable FeMnCo alloy

S.L. Wei, J. Kang, C. C. Taşan
Journal of Materials Research, 38 (2022)

Electrochemical pumping: An alternative solution for hydrogen embrittlement

J. Kim, X. Yao, D. Kong, J. Li, B. Yildiz, C. C. Taşan
Applied Materials Today, 29 (2022) 101627

On discontinuities when computing the stress-field from the strain: A finite volume discretization

B.C. Cameron, C. C. Taşan
International Journal of Solids and Structures, 254-255 (2022) 111912

Chemo-mechanical effects on the cutting-induced mixed-mode II-III fracture of martensitic stainless steels: An in-situ investigation

G. Roscioli, M. Repka, S. Pedrazzini, C. C. Taşan
Acta Materialia, 231 (2022) 117803

Enabling multi-material gradient structure in laser powder bed fusion

A. G. Demir, J. Kim, F. Caltanissetta, A. J. Hart, C. C. Taşan, B. Previtali, B. M. Colosimo
Journal of Materials Processing Technology, 301 (2022) 117439

In-situ investigation of plasticity in a Ti-Al-V-Fe (α+β) alloy: Slip mechanisms, strain localization, and partitioning

S.L. Wei, J. Kim, C.C. Taşan
International Journal of Plasticity, 148 (2022) 103131

Towards physical insights on microstructural damage nucleation from data analytics

B. Cameron, C.C. Taşan
Computational Materials Science, 202 (2022) 110627

In-situ scanning electron microscope thermal desorption spectroscopy (SEM-TDS) analysis of thermally-induced titanium hydride decomposition and reformation

H. Yan, J. Kim, C. C. Taşan
Acta Materialia, 226 (2022) 117562

2021

Tuning mechanical metastability in FeMnCo medium entropy alloys and a peak into deformable hexagonal closed-packed martensite

S.L. Wei, M. Xu, J. LeBeau, C.C. Taşan
Applied Physics Letters, 119, 261905 (2021)

Hydrogen-induced martensitic transformation and twinning in Fe₄₅Mn₃₅Cr₁₀Co₁₀

M.R. Ronchi, H. Yan, C.C. Taşan,
Metallurgical and Materials Transactions A (2021)

Influence of co-existing medium Mn and dual phase steel microstructures on ductility and Lüders band formation

Z.Y. Liang, Z.H. Cao, J. Lu, M.X. Huang, C.C. Taşan
Acta Materialia, 221 (2021) 117418

Composition-dependent slip planarity in mechanically-stable face centered cubic complex concentrated alloys and its mechanical effects

F. He, S.L. Wei, J.L. Cann, Z. Wang, J. Wang, C.C. Taşan
Acta Materialia, 220 (2021) 117314

Roughening improves hydrogen embrittlement resistance of Ti-6Al-4V

J. Kim, D. Hall, H. Yan, Y. Shi, S. Joseph, S. Fearn, R.J. Chater, D. Dye, C.C. Taşan
Acta Materialia, 220 (2021) 117304

Element-resolved local lattice distortion in complex concentrated alloys: An observable signature of electronic effects

H.S. Oh, K. Odbadrakh, Y. Ikeda, S. Mu, F. Körmann, C-J. Sun, H. S. Ahn, K. N. Yoon, D. Ma, C. C. Taşan, T. Egami, E. S. Park
Acta Materialia, 216 (2021) 117135

In-situ investigation of strain partitioning and microstructural strain path development up to and beyond necking

H.S. Oh, K. Biggs, O. Guvenc, H. Ghassemi-Armaki, N. Pottore, C.C. Taşan
Acta Materialia, 215 (2021) 117023

Enhancing damage-resistance in low carbon martensitic steels upon dual-pass laser treatment

H.S. Oh, J. Kang, C.C. Taşan
Scripta Materialia, 192 (2021) 13–18

Full-field stress computation from measured deformation fields: A hyperbolic formulation

B.C. Cameron, C.C. Taşan
Journal of the Mechanics and Physics of Solid, 147 (2021) 104186

Sustainability through Alloy Design: Challenges and Opportunities

J.L. Cann, H.S. Oh, A. De Luca, D.C. Dunand, D. Dye, D.B. Miracle, E.A. Olivetti, T.M. Pollock, W.J. Poole, R. Yang, C.C. Taşan
Progress in Materials Science, 117 (2021) 100722

Hydride formation in Ti6Al4V: An in-situ synchrotron X-ray diffraction study

J. Kim, J. Kang, C.C. Taşan
Scripta Materialia, 193 (2021) 12–16

Carbon redistribution in quenched and tempered lath martensite

L. Morsdorf, E. Emelina, B. Gault, M. Herbig, C.C. Taşan
Acta Materialia, 205 (2021) 116521

Slip-twinning interdependent activation across phase boundaries: An in-situ investigation of a Ti-Al-V-Fe (α+β) alloy

S.L. Wei, G. Zhu, C.C. Taşan
Acta Materialia, 206 (2021) 116520

2020

Deformation faulting in a metastable CoCrNiW complex concentrated alloy: A case of negative intrinsic stracking fault energy?

S.L. Wei, C.C. Taşan
Acta Materialia, 200 (2020) 992-1007

Natural-mixing guided design of refractory high-entropy alloys with as-cast tensile ductility

S.L. Wei, S. J. Kim, J.Y. Kang, Y. Zhang, Y. Zhang, T. Furuhara, E.S. Park, C. C. Taşan
Nature Materials, 19 (2020) 1175–1181

How hair deforms steel

G. Roscioli, S.M. Taheri-Mousavi, C.C. Taşan
Science, 369, 6504 (2020) 689-694

Damage in metal forming

A.E. Tekkaya, P.O. Bouchard, S. Bruschi, C.C. Taşan
CIRP Annals – Manufacturing Technology, Vol. 69, Issue 2 (2020) 600-623

Design of a V-Ti-Ni alloy with superelastic nano-precipitates

J.-L. Zhang, J.L. Cann, S.B. Maisel, K. Qu, E. Plancher, H. Springer, E. Povoden-Karadeniz, P. Gao, Y. Ren, B. Grabowski, C.C. Taşan
Acta Materialia, 196 (2020) 710-722

Origin of micrometer-scale dislocation motion during hydrogen desorption

M. Koyama, S. M. Taheri-Mousavi, H. Yan, J. Kim, B. Cameron, S. Moeini-Ardakani, J. Li, C.C. Taşan
Science Advance vol.6 no.23 (2020)

Effects of defect development during displacive austenite reversion on strain hardening and formability

M. Jiang, J. Kang, C.A. Hirst, C.C. Taşan
Metallurgical and Materials Transactions A 51 (2020) 3832-3842

Strong macroscale supercrystalline structures by 3D printing combined with self-assembly of ceramic functionalized nanoparticles

B. Domènech, A. Tan, H. Jelitto, E.Z. Berodt, M. Blankenburg, O. Focke, J. Cann, C.C. Taşan, L.C. Ciacchi, M. Müller, K.P. Furlan, A.J. Hart, G. A. Schneider
Advanced Engineering Materials 22 (2020) 2000352

Plastic strain-induced sequential martensitic transformation

S. Wei, J. Kim, J.L. Cann, R. Gholizadeh, N. Tsuji, C.C. Taşan
Scripta Materialia 185 (2020) 36-41

Hydrogenation-induced lattice expansion and its effects on hydrogen diffusion and damage in Ti-6Al-4V

J. Kim, E. Plancher, C.C. Taşan
Acta Materialia 188 (2020) 686-696

Manganese micro-segregation governed austenite re-reversion and its mechanical effects

M-M. Wang, M. Jiang, C.C. Taşan
Scripta Materialia 179 (2020) 75-79

Laser-induced toughening inhibits cut-edge failure in multi-phase steel

J.P.M. Hoefnagels, C. Du, C.C. Taşan
Scripta Materialia 177 (2020) 79-85

High entropy alloys: a focused review of mechanical properties and deformation mechanisms

E.P. George, W.A. Curtin, C.C. Taşan
Acta Materialia 188 (2020) 435-474

Tracking microstructure evolution in complex multi-axial strain paths: A bulge test methodology

E. Plancher, K. Qu, N. H. Vonk, M. Gorji, T. Tancogne-Dejean, C.C. Taşan
Experimental Mechanics 60 (2020) 35-50

2019

Strategies to transform the sustainability of structural metals

D. Raabe, C.C. Taşan, E. Olivetti
Nature, 575 (2019) 64-74.

Diffraction-based misorientation mapping: A continuum mechanics description

S-S. Rui, L-S. Niu, H-J. Shi, S.L. Wei, C.C. Taşan
Journal of the Mechanics and Physics of Solids 133 (2019) 103709

Strain-programmable fiber-based artificial muscle

M. Kanik, S. Orguc, G. Varnavides, J. Kim, T. Benavides, D. Gonzalez, T. Akintilo, C.C. Taşan, A.P. Chandrakasan, Y. Fink, P. Anikeeva

Science 365 (2019) 145-150.

Overview of metastability and compositional complexity effects for hydrogen-resistant iron alloys: Inverse austenite stability effects

M. Koyama, C.C. Taşan, K. Tsuzaki
Engineering Fracture Mechanics, 214(2019), 123-133.

Interstitial-free bake hardening realized by epsilon martensite back-transformation

S.L. Wei, M. Jiang, C.C. Taşan
Metallurgical and Materials Transactions A 50 (2019) 3985-3991

Fatigue resistance of laminated and non-laminated TRIP-maraging steels: Crack roughness vs. tensile strength

Z. Zhang, M. Koyama, M-M. Wang, C.C. Taşan, H. Noguchi
Metallurgical and Materials Transactions A, 50 (2019) 1142-1145.

Engineering atomic-level complexity in high-entropy and complex concentrated alloys

H.S. Oh, S. J. Kim, W. H. Ryu, K. N. Yoon, K. Odbadrakh, M. Sai, F. Körmann, Y. Ikeda, C. C. Taşan, D. Raabe, T. Egami, E. S. Park
Nature Communications, 10 (2019) 2090.

Boundary micro-cracking in metastable FeMn₃₅Co₁₀Cr₁₀ high-entropy alloys

S.L. Wei, J. Kim, C. C Taşan
Acta Materialia, 168 (2019), 76-86.

Microstructural damage sensitivity prediction using spatial statistics

B. Cameron, C.C. Taşan
Scientific Reports, 9 (2019), 2774.

Microstructural and micro-mechanical characterization during hydrogen charging: An in situ scanning electron microscopy study

J. Kim, C.C. Taşan
International Journal of Hydrogen Energy, 44, 12 (2019), 6333-6343.

2018

Phase stability effects on hydrogen embrittlement resistance in martensite – reverted austenite steels

B. Cameron, M. Koyama, C.C. Taşan
Metallurgical and Materials Transactions A, 50 (2018), 29-30.

Multiphase Iron-Steel Objects from Medieval Anatolian Seljuks: Classification and Production Techniques

Ü. Güder, C. C. Taşan, A. Yavas.
Archaeologicke Rozhledy, 70 (2018), 483-493.

Metastability in High Entropy Alloys: a Review

S.L. Wei, F. He, C.C. Taşan
Journal of Materials Research, 33 (2018), 2924-2937.

Multiresolution mechanical characterization of hierarchical materials: Spherical nanoindentation on martensitic Fe-Ni-C steels

A. Khosravani, L. Morsdorf, C.C. Taşan, S. Kalidindi
Acta Materialia, 153 (2018), 257-269.

Experimental–numerical study on strain and stress partitioning in bainitic steels with martensite–austenite constituents

N. Fujita, N. Shikawa, F. Roters, C.C. Taşan, D. Raabe
International Journal of Plasticity, 104 (2018), 39-53.

Preventing damage and redeposition during focused ion beam milling: The “umbrella” method

T. Vermeij, E. Plancher, C.C. Taşan
Ultramicroscopy, 186 (2018) 35-41.

Microstructural mechanisms of fatigue crack non-propagation in TRIP-maraging steels

Z. Zhang, M. Koyama, M.M. Wang, K. Tsuzaki, C.C. Taşan, H. Noguchi
International Journal of Fatigue, 113 (2018) 126-136.

2017

Partial recrystallization of gum metal to achieve enhanced strength and ductility

J.-L. Zhang, C.C. Taşan, M.J. Lai, D. Yan, D. Raabe
Acta Materialia, 135 (2017), 400-410.

Designing duplex, ultrafine-grained Fe-Mn-Al-C steels by tuning phase transformation and recrystallization kinetics

J.-L. Zhang, D. Raabe, C.C. Taşan
Acta Materialia, 141 (2017), 374-387.

Interfacial hydrogen localization in austenite/martensite dual-phase steel visualized through optimized silver decoration and scanning Kelvin probe force microscopy

M. Koyama, T. Nagashima, B. Asif, M. Rohwerder, C.C. Taşan, E. Akiyama, K. Tsuzaki, D. Raabe
Materials and Corrosion, 68 (2016) 306-310.

Effects of martensitic transformability and dynamic strain-age-hardenability on plasticity in metastable austenitic steels containing carbon

T. Ogawa, M. Koyama, C.C. Taşan, K. Tsuzaki, H. Noguchi
Journal of Materials Science, 52 (2017) 7868-7882.

Effects of lamella size and connectivity on fatigue crack resistance of TRIP-maraging steel

Z. Zhao, M. Koyama, M. Wang, K. Tsuzaki, C.C. Taşan, H. Noguchi
International Journal of Fatigue, 100 (2017) 176-186.

A TRIP-assisted dual-phase high-entropy alloys: Grain size and phase fraction dependences of deformation behavior

Z. Li, C.C. Taşan, K.G. Pradeep, D. Raabe
Acta Materialia, 131 (2017) 323-335.

Recent Progress in Microstructural Hydrogen Mapping in Steels: Quantification, Kinetic Analysis, and Multi-Scale Characterization

M. Koyama, M. Rohwerder, C.C. Taşan, A. Bashir, E. Akiyama, K. Takai, D. Raabe, K. Tsuzaki
Materials Science and Technology, 33 (2017) 1481-1496.

Martensite size effects on damage in quenching and partitioning steels

M-M. Wang, J-C. Hell, C.C. Taşan
Scripta Materialia, 138 (2017) 1-5.

Bone-like crack resistance in hierarchical metastable nanolaminate steels

M. Koyama, Z. Zhao, M. Wang, D. Ponge, D. Raabe, K. Tsuzaki, H. Noguchi, C.C. Taşan
Science 355 (2017) 1055-1057.

In-situ observation of silver-decoration evolution under hydrogen permeation: effects of grain misorientation on hydrogen flux in pure iron

M. Koyama, D. Yamasaki, T. Nagashima, C.C. Taşan, K. Tsuzaki,
Scripta Materialia 129 (2017) 48-51.

Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys

Z. Li, C.C. Taşan, H. Springer, B. Gault, D. Raabe,
Scientific Reports, 7 (2017) 40704.

Complexion-mediated martensitic phase transformation in Titanium

J. Zhang, C.C. Taşan, M.J. Lai, A-C. Dippel, D. Raabe,
Nature Communications, 8 (2017) 14210.

2016

Multiple mechanisms of lath martensite plasticity

L. Morsdorf, O. Jeannin, D. Barbier, M. Mitsuhara, D. Raabe, C.C. Taşan
Acta Materialia, 121 (2016) 202-214.

On the mechanism of 332 twinning in metastable β-titanium alloys

M. Lai, C.C. Taşan, D. Raabe
Acta Materialia, 111 (2016) 173-186.

From electronic structure to phase diagrams: A bottom-up approach to understand the stability of titanium–transition metal alloys

L-F. Huang, J. Zhang, M-J. Lai, C.C. Taşan, S. Sandloebes, D. Raabe, J. Neugebauer
Acta Materialia, 113 (2016) 311-319.

Spectral TRIP enables ductile 1.1 GPa martensite

M-M. Wang, C.C. Taşan, D. Ponge, D. Raabe
Acta Materialia, 111 (2016) 262-272.

Metastable high entropy dual phase alloys overcome the strength-ductility trade-off

Z. Li, K.G. Pradeep, Y. Deng, D. Raabe, C.C. Taşan
Nature, 534 (2016) 227-230.

Self-Healing metals

B. Grabowski and C.C. Taşan,
Advances in Polymer Science (1-21). Berlin, Heidelberg: Springer (2016).

Hydrogen-assisted damage in austenite/martensite dual-phase steel

M. Koyama, C.C. Taşan, T. Nagashima, E. Akiyama, D. Raabe, K. Tsuzaki
Philosophical Magazine, 96 (2016) 9-18.

Multi-probe microstructure tracking during heat treatment without an in-situ setup: Case studies on martensitic steel, dual phase steel and β-Ti alloy

J.-L. Zhang, L. Morsdorf, C.C. Taşan
Materials Characterization, 111 (2016) 137-146.

2015

Non-equiatomic high entropy alloys: Approach towards rapid alloy screening and property-oriented design

K.G. Pradeep, C.C. Taşan, M.J. Yao, Y. Deng, H. Springer, D. Raabe
Materials Science and Engineering A, 648 (2015) 183-192.

From high entropy alloys to high entropy steels

D. Raabe, C.C. Taşan, H. Springer, M. Bausch
Steel Research International, 86 (2015) 9999.

Deformation mechanism of Ti-Nb-based gum metal: Dislocation channeling and deformation induced ω-β transformation

M. Lai, C.C. Taşan, D. Raabe
Acta Materialia, 100 (2015) 290-300.

Phase stability of non-equiatomic CoCrFeMnNi high entropy alloys

D. Ma, M.J. Yao, K.G. Pradeep, C.C. Taşan, H. Springer, D. Raabe
Acta Materialia, 98 (2015) 288-296.

Retardation of plastic instability via damage-enabled micro-strain de-localization

J.P.M. Hoefnagels, C.C. Taşan, R. Peters, F. Maresca, V. Kouznetsova
Journal of Materials Science, 50 (2015) 6882-6897.

Enhancing hydrogen embrittlement resistance of lath martensite by introducing nano-films of interlath austenite

M-M. Wang, C.C. Taşan, M. Koyama, D. Ponge, D. Raabe
Metallurgical and Materials Transactions A, 46 (2015) 3797-3802.

High resolution in-situ mapping of microstrain and microstructure evolution reveals damage resistance criteria in dual phase steels

D. Yan, C.C. Taşan, D. Raabe
Acta Materialia, 96 (2015) 399-409.

Damage resistance in gum metal through cold-work induced microstructural heterogeneity

J-L. Zhang, C.C. Taşan, M. Lai, J. Zhang, D. Raabe
Journal of Materials Science, 50 (2015) 5694.

3D structural and atomic-scale analysis of lath martensite: effect of the transformation sequence

L. Morsdorf, C.C. Taşan, D. Ponge, D. Raabe
Acta Materialia, 95 (2015) 366-377.

An overview of dual phase steels: Advances in microstructure-oriented processing and micromechanically-guided design

C.C. Taşan, M. Diehl, D. Yan, M. Bechtold, F. Roters, L. Schemmann, C. Zheng, N. Peranio, D. Ponge, M. Koyama, K. Tsuzaki, D. Raabe
Annual Review of Materials Research, 45 (2015) 19.1-19.41.

Design of a twinning-induced plasticity high entropy alloy

Y. Deng, C.C. Taşan, K.G. Pradeep, H. Springer, A. Kostka, D. Raabe
Acta Materialia, 94 (2015) 124-133.

Origin of shear induced β to ω transition in Ti-Nb-based alloys

M. Lai, C.C. Taşan, J. Zhang, B. Grabowski, L.Huang, D. Raabe
Acta Materialia, 92 (2015) 55-63.

A novel roll bonding methodology for the cross-scale analysis of phase properties and interactions in multiphase structural materials

H. Springer, C.C. Taşan, D. Raabe
International Journal of Materials Research, 106 (2015) 3-14.

Nano-laminate TRIP-TWIP steel with dynamic strain partitioning and enhanced damage resistance

M-M. Wang, C.C. Taşan, D. Ponge, Ann-Christin Dippel, D. Raabe
Acta Materialia, 85 (2015) 216-228.

2014

Integrated experimental-simulation analysis of stress and strain partitioning in multi-phase alloys

C.C. Taşan, M. Diehl, D. Yan, C. Zambaldi, P. Shantraj, F. Roters, D. Raabe
Acta Materialia, 81 (2014) 386-400.

Smaller is less stable: size effects on twinning vs. transformation of reverted austenite in TRIP maraging steels

M-M. Wang, C.C. Taşan, D. Ponge, A. Kostka, D. Raabe
Acta Materialia, 79 (2014) 268-281.

Composition dependence of phase stability, deformation mechanisms and mechanical properties of the CoCrFeMnNi high entropy alloy system

C.C. Taşan, Y. Deng, K.G. Pradeep, M.J. Yao, H. Springer, D. Raabe
JOM, 66,10 (2014) 1993-2001.

Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments-crystal plasticity simulations

C.C. Taşan, J.P.M. Hoefnagels, M. Diehl, D. Yan, F. Roters, D. Raabe
International Journal of Plasticity 63 (2014) 198-210.

Hydrogen-assisted decohesion and localized plasticity in dual-phase steel

M. Koyama, C.C. Taşan, E. Akiyama, K. Tsuzaki, D. Raabe
Acta Materialia, 70 (2014) 174.

A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility

M.J. Yao, K.G. Pradeep, C.C. Taşan, D. Raabe
Scripta Materialia, 72 (2014) 5.

Enhanced superplasticity in an Al-alloyed multicomponent Mn-Si-Cr-C steel

H. Zhang, K.G. Pradeep, S. Mandal, D. Ponge, P. Choi, C.C. Taşan, D. Raabe
Acta Materialia, 63 (2014) 232.

2013

On dislocation involvement in Ti-Nb gum metal plasticity

E. Plancher, C.C. Taşan, S. Sandloebes, D. Raabe
Scripta Materialia, 68 (2013) 805.

Before 2013

Identification of the continuum damage parameter: An experimental challenge in modeling damage evolution

C.C. Taşan, J.P.M. Hoefnagels, M.G.D. Geers
Acta Materialia, 60 (2012) 3581.

A micropillar compression methodology for ductile damage quantification

C.C. Taşan, J.P.M. Hoefnagels, M.G.D. Geers
Metallurgical and Materials Transactions A, 43 (2012) 796.

Multi-axial deformation setup for microscopic testing of sheet metal to fracture

C.C. Taşan, J.P.M. Hoefnagels, E.C.A. Dekkers, M.G.D. Geers
Exp. Mechanics, 52 (2012) 669.

Indentation-based damage quantification revisited

C.C. Taşan, J.P.M. Hoefnagels, M.G.D. Geers
Scripta Materialia, 63 (2010) 316.

Microstructural banding effects clarified through micrographic digital image correlation

C.C. Taşan, J.P.M. Hoefnagels, M.G.D. Geers
Scripta Materialia, 62 (2010) 835.

A critical assessment of indentation-based ductile damage quantification

C.C. Taşan, J.P.M. Hoefnagels, M.G.D. Geers
Acta Materialia, 57 (2009) 495.

Experimental analysis of strain path dependent ductile damage mechanics and forming limits

C.C. Taşan, J.P.M.Hoefnagels, C.H.L.J.ten Horn, M.G.D.Geers
Mechanics of Materials, 41 (2009) 1264.

A brittle-fracture method for 3D visualization of ductile deformation micromechanisms

C.C. Taşan, J.P.M. Hoefnagels, M.G.D. Geers
Scripta Materialia, 61 (2009) 20.

Mechanical performance of resol type phenolic resin/layered silicate nanocomposites

C.C. Taşan, C. Kaynak
Polymer Composites, 30 (2009) 343.

Effects of production parameters on the structure of resol type phenolic resin/layered silicate nanocomposites

C. Kaynak, C.C. Taşan
European Polymer Journal, 42 (2006) 1908.